ANIONIC POLYACRYLAMIDE BRICK:
ENVIROMENTALLY FREINDLY; NON-TOXIC TO PLANTS & ANIMALS; NON-CORROSIVE - WILL
NOT CHANGE PH OF SOIL OR WATER.
2.0 PRINCIPAL USE:
Primary Uses: To clarify water effluent coming from
disturbed soils. CONSTRUCTION SITES - DRAINAGE
BASINS - AGRICULTURE IRRIGATION FURROWS.
SOILOC PAM BRICK is designed to be placed directly in
areas of concentrated flow of water. The brick dissolves
@ 10 ppm releasing the PAM in to the moving water.
Flocculates the suspended solids causing them to clump
& drop out. Eliminates the need for mechanical feeding
•Acrylamide monomer <0.05% Charge density: 10% - 55% by wt.
Anchor in ditches / manholes / catch basins as far upstream as possible. The dissolved
acrylamide must mix well in the moving water and have the opportunity to settle out the
Small jobs: Use 1 brick / 1 acre drainage basin.
Large jobs: Calculate the number of bricks needed based on the weight of water being treated.
Recommended dose - 10 ppm. Inspect after each rain event. Normally lasts 2-4 months.
•KEEP OUT OF THE REACH OF CHILDREN.
•CLEAN UP SPILLS ON HARD SURFACES.
•SLIPPERY WHEN WET.
•AVOID BREATHING DUST.
•USE NO MORE THAN 200# / ACRE / YEAR TO COMPLY WITH EPA REGULATIONS.
KEEP FROM FREEZING.
All equipment can be cleaned with water and brush.
HERCULES ENVIRONMENTAL, Inc.
6596 New Peachtree Rd.
Doraville, GA 30340